Setting up for your Lakeland aerial videography can mean a lot of preparation just to make sure that the location is ready for you to begin your drone flight. It may seem excessive, but there are a lot of things that can go wrong in a single drone flight if you don’t make the needed preparations.
One of the most drastic things that you can run into during an unprepared drone flight is drone flyaway. This happens when your drone loses signal from your transmitter or remote and suddenly veers off course, out of your control.
This is something that is practically the stuff of legends within the Lakeland aerial videography community, but it can happen to you, which is the very last thing that you want to happen to you and your drone. Read on to find out more about how you can avoid drone flyaway on a drone flight.
Avoid congested areas
One of the very first steps that you can take to avoid drone flyaway lies in the preparation stage itself. In this case, it lies in the location that you choose for your drone flight. Make sure that you avoid flying in areas that are congested, not only by people but by buildings and even thickets of trees.
The reason why you should avoid these is that these obstacles can cause your drone to lose connection with your transmitter, which can lead to drone flyaway. However, even in a completely open area, you should still keep an eye out for anything that might interfere with your drone’s signal.
It helps to head out to the area beforehand or take a look to keep an eye out for any obstacles that may result in signal interference. Of course, something as simple as keeping it within your line of sight can go a long way in avoiding drone flyaway.
Set a home point
When you fly your drone, one of the very first things that you need to remember on the site itself is the fact that you need to remember to set a home point for your drone.
A home point is a set of coordinates which tell your drone where the default home point is, which is what it uses as a location to head to if the signal connection gets cut. This is an automatic setting that helps guarantee that the drone has a set point to head to instead of veering off course and crashing.
If you’re going to be on the move, make sure that you update your home point consistently to make sure that your drone doesn’t end up lost when it heads to the first home point.